Description
MEGA OR MICRO COMPENSATOR FOR 9MM CZ-P10 PISTOLS
THIS COMPENSATOR WAS DESIGNED WITH THE USE OF THE FACTORY CZ-P10 1/2X28RH THREADED BARRELS INCLUDING P10C, P10F
ADVANTAGES
- Reduced felt recoil over stock
- Reduced muzzle flip (flatter shooting)
- Faster target acquisition
FEATURES:
- Light weight aluminum
- Anodized black TYPE3 hard coat
- 1/2x28RH thread pitch for factory and aftermarket barrels (Can't guarantee the fitment of any barrel other that the factory CZ barrel, Check specs for threading dimensions)
- 8-32 set screws
- Works with factory 115gr ammunition
- Works with factory guide rod and spring
We recommend use of blue Loctite on barrel thread and set screws for most secure attachment. At minimum use blue Loctite on set screws.
Size spec: Micro-1.065" length x 1.027" width .300 shoulder bore depth, .400 thread depth, .700 overall depth / Mega- 1.265" length x 1.027" width, .300 shoulder bore depth, .400 thread depth, .700 overall depth
We can not be held responsible if the shoulder on your barrel is to long and compensator does not fight tight to the slide. To many barrel manufactures out there and we cant control every situation.
