Description
Optic cut on your factory Sig P220/226/227/229 slide.
-We do recommend at minimum single color Cerakote on the whole slide. You may add that option as well. (We don't just paint optic cut area)
-We cut our optics to an approximate depth of .150" and always machine locating tabs for proper optic alignment.
-We do optic cuts on the slides with deep lightening pocket under the slide as well.
-Since the Firing pin/drop safety plunger will be visible after the optic cut, for RMR only a sealing plate this should be used as backstop for the spring. The optic cut does not affect the safety function of the pistol but the optic will need to be installed for use of pistol.
No optic covers available at this time for P-SERIES optic cuts.
WE DONT DO OPTIC CUTS ON LCI SLIDES.
** Please send your complete upper including internals, barrel and recoil assembly for fitting parts after refinish**
Disclaimer: If parts are not sent with the slide we can not guarantee fitment after refinish. SWP will not be held liable for issues with part fitment if they are not sent.
WE CAN'T DO OPTIC CUTS ON P SERIES SLIDES THAT HAVE A REMOVABLE REAR STRIKER BLOCK. SOME OF THE OLDER SLIDES ARE 2 PIECE AND WONT ACCEPT AN OPTIC CUT. IF YOU SHIP US A SLIDE IN THIS CONFIGURATION, WE WILL SHIP IT BACK AND REFUND YOUR ORDER LESS RETURN SHIPPING. PLEASE CONTACT US IF YOU HAVE ANY QUESTIONS. CLICK HERE FOR PHOTOS OF OLDER P SERIES
